Surfboard selection

Sugar Glider Softboard - 6'6, 7'0, 7'6 and 8'0 - Red

Looking to explore the mid-length area, thinking of chasing high speed, glide and retro lines with the flow of a single fin? The Sugar Glider is the board for you! The Sugar Glider is built for good times and nothing else!

SIZING:
6’6 x 22 x 2 3/4  46.19L
7’0 x 22 x 2 3/4  50.05L
7’6 x 22 5/8 x 2 7/8 57.51L
8’0 x 22 5/8 x 2 7/8  61.52L

Rocker: Med
Fins: Single Fin
Bottom Contours: Single to Double
Outline: Mid Length Bell Pin
Construction: Heat Lamination
Colour: Merlot/Merlot

8'6 Surf School Super Soft - Screw Thru 3F -  Merlot

Features:

• 3 Fin Standard Through Deck
• DECK: PO Layer, XPE Layer and then IXPE Layer
• BOTTOM: PO layer, XPE Layer, HDPE Layer
• Dual Bamboo stringer
• Handle
• FINISH: MERLOT

Fun Division Long PU-PVCP - Longboard - 8'6, 9'1 and 9'6 - Ecoskin Clear

The Fun Division Long has all the elements of traditional longboards with modern features. A single box and side bite configuration adds more drive and performance in critical conditions. The general emphasis is purely on catching a wave, big or small, and turning, walking and nose-riding it all the way to the beach. High volume equals loads of fun all day every day!

Dimensions:

• 8’6 22 3/8 2 7/8 63.65L
• 9’1 22 3/4 3 72.89L
• 9’6 23 1/4 3 1/4 84.33L

Features:

• Construction: PU + PVCP 20mm stringer
• Fin System: FCSII - Single + Side Bites
• Rocker: Low to Mid
• Bottom Contours: Rolled vee
• Tail Shape: Rounded pin
• Colour: Clear

Evenflow - MF Softboard - 6'6 and 7'0 - Rust

MF Mick Fanning Softboards: Developed by three-time world champion Mick Fanning, MF boards are top-of-the-range "soft top" boards, with an EPS core and glass epoxy, featuring a "soft" deck.

The Evenflow: an ultra fun board with a well-distributed volume, which will suit, depending on the size, a beginner / intermediate level or a good surfer who wants to have fun without hurting himself (or hurting others, especially in summer when the crowd  is water-dense!). 

Despite the "soft" deck these boards are quite rigid and offer impressive performance: boost, speed, turns, nervousness, pop, airs. They are equipped with high-end boxes FUTURE™ allowing to put any set of fins compatible with the FUTURE™ system

Features:

• Core: EPS
• Reinforcement stringer
• Delivered with a set of 3 flexible FUTURE™ fins
• Deck : 2 x 6oz E-Cloth + 4mm IXPE Soft Skin
• Bottom : 6oz E-Cloth + 4mm Slick Skin HDPE

Twin Town Super Soft - Softboard - 6'6, 7'0 7'6 and 8'0 - Jade/Merlot

The Twin Town is a mid-length twin, built utilising traditional soft board techniques. Twin Town is lightweight, super durable, extremely flexible and perfect for every level of surfer in a diverse range of surf conditions!
This board generates speed with minimal effort, paddles like a dream, catches any wave you look sideways at and cruises down the line with effortless flow. Switch the soft flex keels out for a retro hard keel fin set and experience one of the fastest high lines around. Twin Town is built for good times and nothing else!

SIZING:
6’6 x 22 x 2 3/4  44L
7’0 x 22 x 2 3/4  48L
7’6 x 22 5/8 x 2 7/8  55L
8’0 x 22 5/8 x 2 7/8  59L

Rocker: Med
Fin System: Multi Box 
Fin Supplied: FCSII River Keel
Bottom Contours: Single to Double
Outline: Mid Length Keel Twin
Construction: Heat Lamination
Colour: Jade/Merlot

Alley Cat Super Soft - Softboard - 7'0, 7'6, 8'0 and 8'6 - Coral/Merlot

New for 2023! The Alley Cat is a sight to behold!

A smooth outline and contemporary mid length curves hide a dark side that likes to get busy in the junkiest conditions.

A classy number with its sleeves rolled up and always ready for fun... 

• 7'0 x 21 1/2 x 2 3/4 - 46.08 L
• 7'6 x 21 3/4 x 2 7/8 - 52.24 L
• 8'0 x 22 x 3 - 58.05 L 

• Construction: Softboard (EPS Core)
• Deck: 2 x 6oz + 4mm IXPE Soft Skin
• Bottom: 6oz + 4mm Slick Skin HDPE
• Fin Boxes: 10 INCH Centre fin plug + 2 Side Fin FSCII Softflex
• Tail shape: Round Tail

EZ - MID PU - PVCP - Surfboard - 7'2, 7'4 and 7'8 - Steel Blue

The EZ MID is for surfers focused on the smooth glide of a longer board without the “learner” plan shape.

It’s all about high lines and trim. Suited to all levels of surfer from beginner - advanced, the wide point is centred for maximum trim and reduced swing weight in the nose.

The EZ MID can be surfed as a single fin or install the side bites for more control in critical conditions.

LENGTH WIDTH THICKNESS VOLUME:

6’6“ X 20 3/4“ X 2 5/8 ” - 38.94L
6’10“ X 21 1/8“ X 2 5/8 ” - 41.69L
7’2“ X 21 1/4“ X 2 3/4 ” - 45.74L
7’4“ X 21 1/2“ X 2 7/8 ” - 49.97L
7’8“ X 21 3/4“ X 3 ” - 55.12L

Features:

• Construction: PU + 10MM PVCP “T” Band stringer
• Lamination: 2 x 4oz deck + 1 x 4oz bottom
• Fin System: FCSII/Futures + single fin box 10“
• Rocker: MEDIUM
• Bottom Contours: SINGLE TO DOUBLE CONCAVE
• Tail Shape: ROUND PIN
• Colour: STEEL BLUE

Keel Twin PVCP Fish Surfboard - 5'8, 5'10, 6'0 and 6'4 - Mustard Colour

FC II FIN SYSTEM

This little fish is short, wide and thick with a flat rocker principle for lots of fun plaining speed perfect for smaller waves. However, these boards can be extremely fun and functional in good quality waves and waves of size.

The classic twin keel fish was developed in the mid 70's as a knee board by Steve Lis. Pintail surfboards were a favourite of his, but his swim fins would hang over the side creating drag. He decided to split the tail, giving him the width needed to support his fins, while still holding on to the performance characteristics of a pintail. This fish proved to be a barrel machine, able to paddle in early, take fairly late drops, hold high and tight in the pocket and was snappy off the top. It wasn't long until he had refined the design to suit stand up surfers, and the fish design took off.

Fun Division Mid XE - Mid Length Surfboard - Clear - 6'8, 7'0 and 7'6

Now available in 3 sizes 6’8, 7'0, 7’6 will ensure your wave count is always at it's maximum. The Fun Division Mid-length is for surfers not really wanting to commit to a full sized longboard but still want to nose ride and trim. This division is suited to all levels of surfer from beginner - advanced.

These boards have a Futures fins setup. Fins not included

Super Soft Tri Softboard - 6'6 and 8'0 - Sky Soy

The Super Soft name says it all! This is a true soft board built utilising traditional construction techniques. Super Soft is lightweight, extremely durable, flexible and perfect for entry-level surfers or finless surfing!
The volume is really well distributed for such a large board with a generous outline that provides a stable platform for catching waves and is the perfect board for those looking to progress their surfing to the next level or as an alternative to a longboard. The tail width provides lift and acceleration in the weakest waves creating and provides a super generous sweet spot.

SIZING:
6’0 x 20 1/4 x 2 3/4 37.57L
6’6 x 22 x 2 3/4  46.19L
7’0 x 22 x 2 3/4  50.05L
7’6 x 22 5/8 x 2 7/8  57.51L
8’0 x 22 5/8 x 2 7/8  61.52L
8’6 x 24 x 3 1/2  87.03L 
9’0 x 24 x 3 1/2  91.92L

Rocker: Med
Fin System: Multi Box 
Fin Supplied: MF Soft Thruster
Bottom Contours: Single To Double
Outline: Wide Round Tail
Construction: Heat Lamination, Dual Stringer
Colour: Sky Soy

Chopped Log Longboard - Ecoskin - 9'2, 9'4 and 9'6 - Clear - FCS II

FCS II FIN SYSTEM

The CHOPPED LOG has a traditional longboard outline. Designed to glide and flow through dead spots in marginal conditions. This board trims and gains speed easily. Great paddling power and favouring pivot turns, this slide loves to be ridden on the nose. It's perfect for point trimming or clean beach break days.

9’2 x 23 x 3 72.04
9’4 x 23 1/8 x 3 1/8 76.98
9’6 x 23 1/4 x 3 1/4 82.03

9'1 Pintail Noserider Longboard - Clear - FCS II

Technical details

The pintail nose rider shares a lot of similarities to the Log but as the name suggest is more setup for nose riding.
It has a little more tail rocker to help hold the tail of the board in the wash when up on the nose coupled with a nose concave to provide control and lift.  It has a slightly finer ‘egg rail’ to engage into the wave face for a stable, controlled ride and the plan shape is also a little more generous in the nose to allow easy walking and cross-stepping.  The pintail is a very forgiving and versatile tail shape that can be turned or jammed easily to match the speed of the wave. This board is available in three sizes, including a ten footer for the bigger surfer and is an asset in the quiver for both beach-breaks and point-breaks.

6'6 Surf School Super Soft Surfboard - Screw Thru 3F - Jade

Platform for catching waves and is perfect for those Looking to progress their surfing
to the next level or The surfer looking for an alternative to a longboard.
The tail width provides lift and acceleration in the Weakest waves creating a super
generous sweet spot!

Features:

• 3 Fin Standard Through Deck
• DECK: PO Layer, XPE Layer and then IXPE Layer
• BOTTOM: PO layer, XPE Layer, HDPE Layer
• Dual Bamboo stringer
• Handle
• FINISH: Jade Green

9'0 Surf School Super Soft - Screw Thru 3F - Aqua

Features:

• 3 Fin Standard Through Deck
• DECK: PO Layer, XPE Layer and then IXPE Layer
• BOTTOM: PO layer, XPE Layer, HDPE Layer
• Dual Bamboo stringer
• Handle
• FINISH: AQUA

10'0 XL Surf School Super Soft - Screw Thru 3F - Soy

Features:

• 3 Fin Standard Through Deck
• DECK: PO Layer, XPE Layer and then IXPE Layer
• BOTTOM: PO layer, XPE Layer, HDPE Layer
• Tripple Wood stringer
• Handle
• FINISH: SOY

9'0 XL Surf School Super Soft - Screw Thru 3F -  Orange

Features:

• 3 Fin Standard Through Deck
• DECK: PO Layer, XPE Layer and then IXPE Layer
• BOTTOM: PO layer, XPE Layer, HDPE Layer
• Tripple Wood stringer
• Handle
• FINISH: ORANGE

8'0 Surf School Surfboard - Screw Thru 3F - Orange

Platform for catching waves and is perfect for those Looking to progress their surfing
to the next level or The surfer looking for an alternative to a longboard.
The tail width provides lift and acceleration in the Weakest waves creating a super
generous sweet spot!

Features:

• 3 Fin Standard Through Deck
• DECK: PO Layer, XPE Layer and then IXPE Layer
• BOTTOM: PO layer, XPE Layer, HDPE Layer
• Tripple Wood stringer
• Handle
• FINISH: ORANGE

7'6 XL Surf School Surfboard - Screw Thru 3F - Aqua

Platform for catching waves and is perfect for those Looking to progress their surfing
to the next level or The surfer looking for an alternative to a longboard.
The tail width provides lift and acceleration in the Weakest waves creating a super
generous sweet spot!

Features:

• 3 Fin Standard Through Deck
• DECK: PO Layer, XPE Layer and then IXPE Layer
• BOTTOM: PO layer, XPE Layer, HDPE Layer
• Tripple Wood stringer
• Handle
• FINISH: AQUA

Aloha EZ-MID 3F (1+2FCSII) PU-PVCP Fun - 6'10, 7'2 and 7'4 - Clear

The EZ MID is like the cooler, more sophisticated older brother of the classic beginner longboard. It's all about style and glide with this board, perfect for riders who want to feel the smooth flow of a longboard without the embarrassing "learner" shape.

The wide point is positioned for maximum trim and reduced swing weight in the nose, allowing you to effortlessly glide across the waves. And if things get critical, you can always install the side bites for more control.

With sizes ranging from 6'6" to 7'8", the EZ MID is suitable for all levels of surfers, from beginners to advanced. Plus, the PU + 10mm PVCP "T" Band stringer construction and 2 x 4oz deck + 1 x 4oz bottom lamination make this board a durable choice.

And let's not forget the stylish tail shape - a round pin that'll have all the other surfers jealous. So grab your EZ MID and get ready to ride with style and grace.

Features

• 10 Inch WHITE Surf Box (slot box) + FCSII (WHITE) 2 FIN
• Glassing: Deck 2 X 4oz Bottom: 1X6oz full + 4oz Fin Patch
• Foam Core: Bennet with Optical Highlighter
• PVC/Wood Sandwich stringer Grey paint
• CLEAR with PVC stringer w/Grey paint - Sanded

*No Fins Included

Aloha Wing Twin 3F (FCSII) - Shadow Force - 5'8 and 6'0 - Clear/Red Stringer

Features:

• FUTURES: 3 Fin Boxes (White)
• Glassing: DECK: 1 x 3oz RECYCLED PET + 1 x 4oz + 45mm INNEGRA twin band Stringer
• Glassing: BOTTOM: 1 X 6oz EGLASS + 45mm INNEGRA twin band Stringer + 4oz oval fin patches
• Foam Core: High Desity 36 gram EPS
• Resin: UV Optical Highlight Epoxy
• Future Leash Plug (White)
• Clear with Blood Red Sprayed on stringer Top-Bottom

*No Fins Included

Aloha Skipper 5F (FCSII) - Shadow Force - 6'3, 6'5, 6'8 and 6'10 - Clear/Metal Stringer

The Skipper is an ultimate all rounder. An easy paddler with slightly lower entry rocker and fuller outline. Wide point is forward with a lower rail that blends smoothly into the foiled round pin tail. Five fin configuration allows for thruster performance in most conditions and a quad option when the waves are a little more critical or tubing.

Features:

• FUTURES: 3 Fin Boxes (White)
• Glassing: DECK: 1 x 3oz RECYCLED PET + 1 x 4oz + 45mm INNEGRA twin band Stringer
• Glassing: BOTTOM: 1 X 6oz EGLASS + 45mm INNEGRA twin band Stringer + 4oz oval fin patches
• Foam Core: High Desity 36 gram EPS
• Resin: UV Optical Highlight Epoxy
• Future Leash Plug (White)
• Clear with METAL Sprayed on stringer Top-Bottom

*No Fins Included